Use of Site. National Instruments ("NI") authorizes you to view and download the materials at this Web/FTP site ("Site") only for your personal, non-commercial use, provided that you retain all copyright and other proprietary notices contained in the original materials on any copies of the materials. You may not modify the materials at this Site in any way or reproduce or publicly display, perform, or distribute or otherwise use them for any public or commercial purpose. For purposes of these Terms, any use of these materials on any other Web site or networked computer environment for any purpose is prohibited. The materials at this Site are copyrighted and any unauthorized use of any materials at this Site may violate copyright, trademark, and other laws. If you breach any of these Terms, your authorization to use this Site automatically terminates and you must immediately destroy any downloaded or printed materials.
Links To Other Web Sites. Links to third party Web sites on this Site are provided solely as a convenience to you. If you use these links, you will leave this Site. NI does not control and is not responsible for any of these sites or their content. Thus, NI does not endorse or make any representations about them, or any information, software or other products or materials found there, or any results that may be obtained from using them. If you decide to access any of the third party sites linked to this Site, you do this entirely at your own risk.
Disclaimer. THE CONTENTS OF THIS SITE ARE PROVIDED "AS IS." NI DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY. The contents of this Site could contain technical inaccuracies, typographical errors or out-of-date information. Information may be updated or changed at any time, without notice. Use of the information contained is therefore at your own risk. Warranties for products purchased from NI are provided in separate documents. Any Code on this site is provided AS IS. It has not been tested or validated as a product, for use in a deployed application or system, or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject to the Sample Code License Terms which can be found at: ni.com/samplecodelicense.
Limitation of Liability. NI WILL NOT BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, COVER, ECONOMIC, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE CONTENTS OF THIS SITE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Applicable law may not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Applicable Laws. NI administers this Site from its offices in Austin, Texas. NI makes no representation that materials at this Site are appropriate or available for use outside the United States, and access to them from territories where their contents are illegal is prohibited. You may not use or export or re-export the materials at this Site or any copy or adaptation in violation of any applicable laws or regulations, including, without limitation, U.S. export laws and regulations. If you choose to access this Site from outside the United States, you do so on your own initiative and are responsible for compliance with applicable local laws. These Terms will be governed by and construed in accordance with the laws of the State of Texas, without giving effect to any principles of conflicts of laws.
General. NI may revise these Terms at any time by updating this posting. You should visit this page from time to time to review the then current Terms because they are binding on you. Certain provisions of these Terms may be superseded by expressly designated legal notices or terms located on particular pages at this Site.
Questions or comments: please contact us at https://forum.digilent.com
Trademarks. ActiveMath, Analysis Advisor, AutomationView, AutomationWeb, BioBench, BridgeVIEW, Citadel, CodeBuilder, CodeLink, ComponentWorks, CVI, CVI logo, DAQ Designer, DAQArb, DAQCard, DAQInstruments, DAQMeter, DAQPad, DAQPnP, DataSocket, DAQScope, DAQSourceCode, DAQ-STC, DAQValue, DAQWare, FieldPoint, FlexFrame, HiQ, HiQ-Script, HotPnP, HS488, IMAQ, InsideVIEW, Instrumentation Newsletter, InstrumentationWeb, Instrupedia, LabSuite, LabVIEW, LabVIEW logo, LabVIEW TestSuite, Lookout, MANTIS, Measure, MicroGPIB, MIGA, MITE, NAT4882, NAT7210, NAT9914, natinst.com, National Instruments, National Instruments logo, NI-488, NI-488.2, NI-488.2M, NI-488M, NI-CAN, NI-DAQ, NI-DSP, NI-FBUS, NI-IMAQ, NI-PGIA, NI-SHELL, NI-VISA, NI-VXI, NIWeek, PXI and logo, RTSI, SCXI, SmartCode, SpectrumWare, StillColor, Take Measurements, Not Estimates, The Software is the Instrument, The Virtual Instrumentation Company, TIC, T&M Explorer, TNT4882, TNT4882C, TNT4882I, Turbo488, VI UserNet, VirtualBench, VXI Integrator, VXIpc, VXIupdate, and World Wide Instrumentation and other names, logos, icons, and marks identifying NI products and services referenced herein are either trademarks or registered trademarks of NI and may not be used without the prior written permission of NI.
Other product and company names listed are trademarks or trade names of their respective companies.
Any rights not expressly granted herein are reserved.