Home > DT7837 Product Description > Supported Accessories
To make development easier, the optional DT7837 Accessory kit is available. This kit includes the following accessories, which can also be purchased separately, if desired:
STP26 screw terminal panel – This screw terminal panel accepts tachometer, digital input, C/T gate input, and C/T clock input signals from the Digital connector on the DT7837 module and provides digital output and C/T clock output signals from the Digital connector on the module.
The 26-pin, 36-inch, EP406 cable is included with the STP26 screw terminal panel. The cable allows you to attach the STP26 screw terminal panel to the Digital connector on a DT7837 module.
EP405 USB
to Serial TTL Debug Cable – This 3Mbaud, 1.8 m cable connects
the USB port of the host computer to serial port 0 connector J13 on
the DT7837, allowing you to debug the DT7837 using a terminal interface.
EP372 Ethernet Cable – This 2 meter cable connects to the Ethernet connector on the DT7837 module and to the network.
EP365 USB Cable – This 1.83 meter cable connects to the USB connector on the DT7837 module and to your host computer.