The table below lists the constants you can use in the Range argument and the cbALoadQueue() method's gainArray parameter. Valid ranges for your hardware are listed in the Universal Library User’s Guide.
| Constant name | Range | Value |
| BIP60VOLTS | ±60 volts | 20 |
| BIP20VOLTS | ±20 volts | 15 |
| BIP15VOLTS | ±15 volts | 21 |
| BIP10VOLTS | ±10 volts | 1 |
| BIP5VOLTS | ±5 volts | 0 |
| BIP4VOLTS | ±4 volts | 16 |
| BIP2Pt5VOLTS | ±2.5 volts | 2 |
| BIP2VOLTS | ±2 volts | 14 |
| BIP1Pt67VOLTS | ±1.67 volts | 11 |
| BIP1Pt25VOLTS | ±1.25 volts | 3 |
| BIP1VOLTS | ±1 volts | 4 |
| BIPPT625VOLTS | ±0.625 volts | 5 |
| BIPPT5VOLTS | ±0.5 volts | 6 |
| BIPPT312VOLTS | ±0.3125 volts | 17 |
| BIPPT25VOLTS | ±0.25 volts | 12 |
| BIPPT2VOLTS | ±0.2 volts | 13 |
| BIPPT156VOLTS | ±0.15625 volts | 18 |
| BIPPT125VOLTS | ±0.125 volts | 22 |
| BIPPT1VOLTS | ±0.1 volts | 7 |
| BIPPT078VOLTS | ±0.078125 volts | 19 |
| BIPPT05VOLTS | ±0.05 volts | 8 |
| BIPPT01VOLTS | ±0.01 volts | 9 |
| BIPPT005VOLTS | ±0.005 volts | 10 |
| UNI10VOLTS | 0 - 10 volts | 100 |
| UNI5VOLTS | 0 - 5 volts | 101 |
| UNI4VOLTS | 0 - 4 volts | 114 |
| UNI2Pt5VOLTS | 0 - 2.5 volts | 102 |
| UNI2VOLTS | 0 - 2 volts | 103 |
| UNI1Pt67VOLTS | 0 - 1.67 volts | 109 |
| UNI1Pt25VOLTS | 0 - 1.25 volts | 104 |
| UNI1VOLTS | 0 - 1 volts | 105 |
| UNIPt5VOLTS | 0 - 0.5 volts | 110 |
| UNIPt25VOLTS | 0 - 0.25 volts | 111 |
| UNIPt2VOLTS | 0 - 0.2 volts | 112 |
| UNIPt1VOLTS | 0 - 0.1 volts | 106 |
| UNIPt01VOLTS | 0 - 0.01 volts | 107 |
| UNIPt02VOLTS | 0 - 0.02 volts | 108 |
| UNIPt05VOLTS | 0 - 0.05 volts | 113 |
| MA4TO20 | 4 - 20 mA | 200 |
| MA2TO10 | 2 - 10 mA | 201 |
| MA1TO5 | 1 - 5 mA | 202 |
| MAPt5TO2pt5 | 0.5 - 2.5 mA | 203 |
| MA0TO20 | 0 - 20 mA | 204 |
| BIPPT025AMPS | ±0.025 amps | 205 |
| Not Used | –1 |