Home > Verifying the Operation of the DT7816 > Web Server Application > Acquiring Continuous Input Data in the Input Stream > Setting Up Analog Input Channels

Setting Up Analog Input Channels

From the Input Stream page of the DT7816 web server, click Analog to set up the options for the analog input channels.
The following options appear:

For each analog input channel (AIN0 to AIN7), perform the following steps:
 

1. Click Yes under the Enabled column if you want to acquire data from the analog input channel in the input stream. If this box is unchecked, data from the analog input channel is not acquired.

2. Ensure that you wire signals appropriately for analog input operations.

3. When all of the analog input channels are configured, click Save to save the configuration.

Refer to the DT7816 User's Manual for more information on analog input operations.